SMS信息中心電話號碼

[talfred]

請問有沒有人知道怎樣更改Iphone內SMS信息中心電話號碼?

[desert888]

之前在網路上看到還有吉米有提到的一些方法 自己試試囉

Any command can be preceded by *#, ** or ##.*# is INTERROGATION.** is SETUP.## is CANCEL / DELETE.
*#5005*78283# This dumps a baseband log in /Library/Logs/Baseband/ -Note1
**5005*78283# This dumps a baseband log in /Library/Logs/Baseband/ - Note1
##5005*78283# This dumps a baseband log in /Library/Logs/Baseband/ - Note 1
*#5005*62# "Error performing request - No Network Service" - Note 2
*#5005*62255# "Error performing request - No Network Service" - Note 2
*#5005*87223# "Error performing request - No Network Service" - Note
2*#5005*86# Displays the Voice Mail dial-in number.
**5005*86*VOICEMAIL# Sets the Voice Mail number to VOICEMAIL (international format).
##5005*86# Erases the Voice Mail number from phone.
*#5005*7672# Display the SMSC Setting.
**5005*7672*SMSCNUMBER# Sets the SMSC to SMSCNUMBER (international format).
##5005*7672# Erases the SMSC number from phone.
*#5005*22# "Error performing request - No Network Service" - Note 2
**5005*22# Unknown. Displays "Please wait"; returns to dialpad - Note 2
##5005*22# Unknown. Displays "Please wait"; returns to dialpad - Note 2
*#5005*5264# This reads LANG and tells you the "actual language" (en).
*#5005# "Error performing request - No Network Service" - Note 2
##5005*22*12345678# Function unknown, displays "please wait"...; power-off to exit.'Note 1:


It may be necessary to change the prefix from the set of (*#, **, ##) to initiate a new log dump. The logs are not "tail" able, since this is a single dump, with no additional data written. So far, these logs appear to always remain the same size. Logfiles are stamped with the current date.Note 2: These tests were performed with a stock phone on the AT&T network. It is possible that these errors represent debugging features that are only available on a special debug cellular base-station (CONJECTURE only!)'


改Voice Mail中心
中華電信請撥
*5005*86*777#然後按撥號

台灣大哥大請撥
*5005*86*123#然後按撥號

遠傳請撥
*5005*86*222#然後按撥號

遠傳預付卡客戶請撥
*5005*86*777#然後按撥號

HK CSL客戶請撥
*5005*86*988#然後按撥號

總而言之，原則上就是
*5005*86*xxx#然後按撥號，這裡的xxx就是你輸入你撥打語音信箱的那個號碼，就對啦～

[desert888]

SMS相關應該是這三個

*#5005*7672# Display the SMSC Setting.
**5005*7672*SMSCNUMBER# Sets the SMSC to SMSCNUMBER (international format).
##5005*7672# Erases the SMSC number from phone.