iItunes無法開啟

[tasiyihao]

我的iTunes在我升級Quicktime後就無法開啟
之後 將iTunes & Quicktime都重新安裝後
之後開iTunes 出現"無法找到程序輸入點 QTCF_CFUniCharGetUnicodePropertyDataForPlane(在動態連結程式庫 QTCF.dll)

開Quicktime 無法初始化 錯誤#-2093
我之後重新來來回回灌了許多次 甚至拿舊的iTunes出來灌
都還是無法開啟

請問 該如何救?

[Richard]

我的iTunes在我升級Quicktime後就無法開啟
之後 將iTunes & Quicktime都重新安裝後
之後開iTunes 出現"無法找到程序輸入點 QTCF_CFUniCharGetUnicodePropertyDataForPlane(在動態連結程式庫 QTCF.dll)

開Quicktime 無法初始化 錯誤#-2093
我之後重新來來回回灌了許多次 甚至拿舊的iTunes出來灌
都還是無法開啟

請問 該如何救?

Get a Mac

*你試著結束全部跟iTunes有關的程式後再移除看看
或者你的系統時間錯了(我沒有開玩笑....我的PC上次也是打不開,重灌系統也一樣....結果連上網路之後它問我要不要抓網路時間......對完時間就打的開了)

[walson]

我也出現這個問題，我有移除iTunes，然後重裝....結果還是不行，還是出現Quicktime有問題....

[tingyiliu]

我也出現這個問題，我有移除iTunes，然後重裝....結果還是不行，還是出現Quicktime有問題....

救命啊!!......我也有相同問題*，按照前面講的方法作了，無解。關掉所有相關程序，移除itunes再重新安裝，錯誤畫面仍然存在。

[Hiraku]

我的iTunes在我升級Quicktime後就無法開啟
之後 將iTunes & Quicktime都重新安裝後
之後開iTunes 出現"無法找到程序輸入點 QTCF_CFUniCharGetUnicodePropertyDataForPlane(在動態連結程式庫 QTCF.dll)

開Quicktime 無法初始化 錯誤#-2093
我之後重新來來回回灌了許多次 甚至拿舊的iTunes出來灌
都還是無法開啟

請問 該如何救?

We'll try an extension of Insanegi's advice next, Kevin. This time we'll uninstall both Apple Application Support and QuickTime. (QuickTime needs a properly working version of Apple Application Support in place in order to work correctly.) When we reinstall QuickTime, that then should also reinstall Apple Application Support. We'll also take a few other explicit precautions.

Preliminary phase

First download and save a copy of the QuickTime installer to your hard drive. (Don't run the install on line, and don't start the install just yet.) Get the version of the QuickTime installer that doesn't mention iTunes.

http://www.apple.com/quicktime/download/

Now quit Safari if you have it open. (The 4.0.4 version of Safari also uses Apple Application Support, and will interfere with the Apple Application Support uninstall if it is open.)

Uninstall phase

Head into your "Uninstall a program" control panel.

Uninstall QuickTime.
Uninstall Apple Application Support.

(Fron now on, until we reinstall Apple Application Support, your Safari 4.0.4 (if you have that installed) will no longer be able to launch.)

Next we'll remove any left-over QuickTime or Apple Application Support program files.

In "Computer", navigate into the C:\Program Files\ folder. Right-click on the QuickTime folder (if it still exists) and select "Delete".

In "Computer" navigate into the C:\Program Files\Common Files\Apple\ folder. Right-click on the Apple Application Support folder (if it still exists) and select "Delete".

In "Computer" navigate into the C:\Windows\system32\ folder. Check to see if there is a QuickTime file or a QuickTimeVR file. If either of them still exist, right-click on each and select "Delete".

Empty your recycle bin.

Reinstall phase

Restart the PC. (If iTunes is installed on the PC, you'll probably receive a message at this stage saying that iTunes will not run because Apple Application Support is missing. Click through the message.)
Do not open any applications.
Disconnect from your network and/or the Internet.
Disable all security software (firewall, antivirus and antispyware).
Now start the QuickTime install by doubleclicking the QuickTimeInstaller.exe file you downloaded earlier. (This install will also reinstall Apple Application Support.)

Reenable all security software prior to reconnecting to your network and/or the internet.

Does the install seem to go through properly? If so, try launching QuickTime again. Does it launch without the error message this time?




from:http://discussions.apple.com/message...55169#10655169

[tingyiliu]

I've tried your solutions, but doesn't work out.
What should I do now?
Thanks....

[tingyiliu]

I've tried your solutions, but doesn't work out.
What should I do now?
Thanks....

剛才到http://discussions.apple.com/message...55169#10655169看了一下

找到~C:\Program Files\QuickTime\QTSystem
複製 QTCF.dll
貼到 C:\Windows\System32
就解決了

[MOS1013]

剛才到http://discussions.apple.com/message...55169#10655169看了一下

找到~C:\Program Files\QuickTime\QTSystem
複製 QTCF.dll
貼到 C:\Windows\System32
就解決了

It WORKS!

[ha168156]

我還是不行開啟呢...找到~C:\Program Files\QuickTime\QTSystem
複製 QTCF.dll
複製完還是一樣錯誤~~~~

[Alien0510]

各位大大~~小弟也是遇到相同的問題!!
也試過以上所述的方法!!
開始後還是一樣!!
請問各位前輩是否遇到相同情況!!有不同的解決辦法!!還是我那邊有錯誤!!
解救一下!!不然都沒辦法更新遊戲....
謝謝嚕!!