redsnow rc15 for 4.3.3

[jay30431]

… three in a row! Apple released iOS 4.3.3 on Wednesday, and once again the untethered jailbreak exploit that *i0n1c created for 4.3.1 still works. That makes it an unprecedented three firmwares where the same userland exploit works. We’re not exactly sure why Apple hasn’t fixed the hole yet, but we’re not complaining!


Today’s PwnageTool and redsn0w incorporate *i0n1c’s port to 4.3.3 (it’s ironic that such a long-lasting untether doesn’t even have an official name!). It also of course uses geohot’s limera1n bootrom exploit to inject the jailbreak. The 4.3.3 untether works on all devices that actually support 4.3.3 except for the iPad2:

• iPhone3GS
• iPhone4 (GSM)
• iPod touch 3G
• iPod touch 4G
• iPad1
• AppleTV2G (v4.3 8F202)

Some things to note:

1. ultrasn0w unlockers must stay away from redsn0w! Use only a custom IPSW to update to 4.3.3, to avoid updating your baseband. There are plenty of tutorials for both redsn0w and PwnageTool at sites like iClarified.com. Or feel free to ask away in our comments section below.
2. ultrasn0w has been updated to v1.2.3 to be compatible with iOS 4.3.3 and earlier (the ultrasn0w update does not include any new baseband support!). Please reboot your iPhone using the normal “slide to power off” swipe after installing ultrasn0w 1.2.3.
3. By popular demand, redsn0w now allows you to enable multitasking gestures (although most will find it useful only on iPads).
4. iPad2 update: The iPad2 jailbreak remains under development. As you may know, the original exploit *comex developed in the first week of the iPad2 release was mysteriously fixed by Apple within days of its development. Partly because of this, don’t expect much public discussion of the iPad2 jailbreak until it’s actually finished and ready for release (and please avoid asking about it). In all liklihood, it will be a userland exploit like the first (unreleased) one, not dependent on bootrom dumps. The first one can’t be released even for those with the original 4.3 firmware due to legal (distribution) reasons.

As always, please feel free to ask for help or advice in our comment section, with out friendly moderators Confucious, sherif_hashim, dhlizard, Frank55, and subarurider (and many other very knowledgable commenters too!)


redsn0w 0.9.6rc15:

• OS X
• Windows

rc15已出 總算等到了
redsnow的用法應該不需要我多解釋了 大家下來用吧!

不過rc15不適用鎖機 所以有鎖機的請用pwnagetool吧

另外ipad2的用戶又要失望了 因為rc15還是沒支援

補充圖說:
請認明rc15的真身


然後選擇4.3.3的韌體


成功後就點NEXT rc15多了第四個選項是可以開啟多工手勢,應該可以造福不少人


點選完你要的項目之後就可以進行JB啦 祝各位大大順利成功!!

在下成功JB後:


redsnow幫你開啟的多工手勢


CYDIA

[leey66715]

讚喔！！晚上下班來下載jb囉。

[Steven_IP]

又來了...真是頻密呀..哈哈

[hank00010826]

話說會不會有問題阿?= = 等等來當先鋒好了

[Hiraku]

一不小心就刷好了

[secrethk]

上星期初我才在黑色jb 4.3.2 , 星期五轉白色又再來一次, 今次暫時不上4.3.3, 等遲些再試~ 會想死 XDD

[jay30431]

一不小心就刷好了

我也刷好了XD

[joshua4534]

還沒支援iPad2...... 可悲啊！！

[jay30431]

上星期初我才在黑色jb 4.3.2 , 星期五轉白色又再來一次, 今次暫時不上4.3.3, 等遲些再試~ 會想死 XDD

還好我只有一隻黑色

[jay30431]

話說會不會有問題阿?= = 等等來當先鋒好了

刷完一切正常哦