重要 - OTB 1.1.2 解鎖資訊 - iPhone4.TW

會員登入



顯示結果從 1 到 3 共計 3 條
  1. #1

    剛加入我們

    註冊日期:10-31-2007
    文章:20
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    ...

    As many of you, im sure, have already read geohots blog, you may or may not be aware that as it currently stands, we WILL NOT be able to software unlock the 4.6 bootloader iPhone until a new firmware Update is released.

    (google 翻譯版)
    正如你們許多人,我肯定,已讀geohots博客,你可能或可能不知道,因為它目前的立場,我們將無法向軟件解開4.6 bootloader 的 iphone的,直到一個新的固件更新就會被釋放出來。
    ...

    TA_Mobile, geohot and myself have found away of harware unlocking 1.1.2 OTB iPhones, the problem is there are very very few people in the world with the skills and equipment needed to do it. It is basically a Hardware bootloader downgrade but involves removing the Intel IC from the Comm board and reflashing the chip. This method will not be useful to most people but once we have it done and completed the first phone, we will post a Turorial for the extremely technically minded!!

    (google 翻譯版)
    TA_Mobile , geohot和本人發現途徑硬件解鎖1.1.2 OTB iphones ,但問題是有很少人在世界上具有的技能和裝備,而不必這樣做。它基本上是一個硬件的bootloader降級,但涉及去除英特爾集成電路從Comm board和reflashing芯片。這種方法不會對大多數人有用,但一旦我們完成任務,並完成了第一個電話,我們將會為極技術上的頭腦貼出turorial!
    ...

    轉貼自
    http://www.hackint0sh.org/forum/showthread.php?t=17490


  2. #2
    perfecblue 的頭像

    海盜船長

    註冊日期:09-23-2007
    文章:233
    謝謝你: 9
    在 6篇文章中獲得 75個感謝
    感謝神矢兄提供消息。

    基本上,整個文章的意思就是說:

    1. 在軟體解鎖的過程中必須要把baseband firmware給洗掉換過(換成patched過的)

    2. 洗掉bb firmware需要secpack

    3. 以往的boot loader(3.9)允許使用該bb firmware或更新的sacpack來洗(例如:boot loader 3.9允許使用1.1.1的secpack或是更新的secpack)

    4. 但是這次的新boot loader卻不再允許使用當時的bb firmware的secpack來洗掉bb,所以就算1.1.2的secpack已經到手了,也於事無補

    5. 所以就現階段來講,原生的1.1.2電話(買來就是的),只有等到Apple出新的軔體,才有可能可以破解

    至於geohot正在研究的硬體解鎖,據該文作者所言,實在難的不像話,不是一般人可以動手實做的。


  3. #3
    吉米丘 的頭像

    勸敗大魔王

    註冊日期:09-20-2007
    文章:50,710
    謝謝你: 9,906
    在 6,551篇文章中獲得 48,051個感謝
    perfecblue兄,引用您的摘要,上blog首頁囉

    真是一個令人嘆息的消息...


 

 

發文規則

  • 不可以發表新主題
  • 不可以發表回覆
  • 不可以上傳附件
  • 不可以編輯自己的文章
  •  
回到此頁頂端