blackra1n is released

[Hiraku]

黑雨是不是不支援iPod Touch Gen.3 OS 3.1.2
= ="
安裝到一半系統就不理我了

國外說三代要跑兩次的樣子

[irdiot]

奇怪，我打開黑雨都會出現「blackra1n.exe 發生問題，必須關閉，謹此致歉」，用xp或windows 7都不行，換一台電腦也不行，把iphone重置後啟動，再開黑雨，還是不行。

誰能幫幫我？

[happybug]

有教學喔
http://www.iclarified.com/entry/index.php?enid=5527

[proamo]

我是中華原生3.1，剛JB完，本來用起來也沒什麼問題

但在安裝完 winterboard 後，重開機

現在就只能看到白蘋果，然後自動關機

雖然大部份的人用得都沒什麼問題

還是請大家小心一點

如果有人和我一樣狀況有解決方法，也麻煩不吝嗇的告訴我一聲，謝謝!!

下載3.1韌體中 >"<

[kuoyiru]

These are instructions on how to jailbreak your iPhone and iPod touch using BlackRa1n for Windows.

The BlackRa1n jailbreak will work with the latest 3.1.2 firmware; however, it will not hacktivate your iPhone. This means that if you are not on an official Apple approved carrier BlackRa1n cannot activate it.

For those with the new iPod touch, BlackRa1n only supports a tethered jailbreak. This means that once jailbroken you should not let your battery die. If it does die you will need to reconnect it to the computer and use BlackRa1n to boot it.

WARNING: Even though the GeoHot jailbreak supports 3.1.2 do not update if you are on iPhone OS 3.0.1 or 3.0. You will lose your unlock. Use PwnageTool to safely update to 3.1 without performing a baseband update. If you really must have 3.1.2 then wait for the next version of PwnageTool. If you have already updated to 3.1 or 3.1.2 without using PwnageTool then you've lost the ability to unlock for the time being. You can now use BlackRa1n to at least regain your jailbreak

Ok lets begin...


Step One
Open your web browser of choice and navigate to http://www.blackra1n.com. Click the Windows logo at the bottom of the screen.


Step Two
When prompted save the download to your desktop




Step Three
Then double click the blackra1n executable file from the desktop to launch the program


Step Four
Make sure your iPhone or iPod is connected to the computer then click the large make it ra1n button


Step Five
You iPhone will now be placed in recovery mode.


You will see a picture of GeoHot that replaces the regular recovery mode screen on your device.


blackra1n will run and then your device will reboot.




A popup message will appear informing you that BlackRa1n is free software and if you appreciate it you can donate to GeoHot at geohot*gmail.com.


Step Six
Once your device reboots it will be jailbroken and you will notice a blackra1n icon on the desktop. Make sure you have an internet connection and press to launch the application.


Choose the installer application of your choice then press the Install button at the top right of the screen


BlackRa1n will begin to download and install the package you selected.


Step Seven
Once complete BlackRa1n will respring your iPhone and you will find the installer package of your choice on the Springboard.


Step Eight
Once you have confirmed your installer package is working correctly you may use the Uninstall blackra1n button inside the BlackRa1n app to remove it from your springboard.


***THANKS: A big thanks to Geohot for making this jailbreak possible. Also thanks to those who contributed to making it a success.

[kuoyiru]

rock 跟 cydia 類似的

[elee1998]

很好用，快又方便！JB 都只係幾拾秒！現在 restore 資料！

一流的快，推薦！

[winlin]

大家不知道有沒有注意到 這個"黑雨"上面的版本是"RC1"
所謂的RC就是代表著Release Candidate ....
也就是最接近最終正式版產品的版本,比正式版本還要之前
比Beta版本還要後面,所以今天這個軟體如果有什麼問題產生
也不奇怪....千萬別以為這是萬能的~

[hoiyi88]

太強了。。。。己經jb成功

[i031629]

我也成功了~ 沒遇到什問題目前....