2G韌體3.1.2 優化Mac篇 - 第6頁 - iPhone4.TW
本站已於 2026 年 5 月轉為靜態存檔  ·  內容凍結,無法登入、發文、回覆、搜尋  ·  想看吉米最新內容? 前往 jimmy4.tw →


第6頁,共8頁 第一第一 12345678 最後最後
顯示結果從 51 到 60 共計 80 條
  1. #51

    愛用者

    註冊日期:08-06-2009
    文章:97
    謝謝你: 5
    在 2篇文章中獲得 3個感謝
    搞定 不用在用quickpwn----->試了n次 就是不會主動找iphone

    剛才弄的方法是 1 回復到出廠設定 2進入dfu模式 3 回復到自制韌體(記憶體設定到1012)
    順順利利就這樣搞定了
    感謝loukafai


  2. #52

    愛用者

    註冊日期:02-03-2008
    文章:78
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    請問各位先進2G刷完3.1.2後速度有明顯的提升嗎?相較於2.2.1來說?
    很想替我的2G也升級~但是對iPhone的F/W已經沒啥信心了說


  3. #53

    熱血的愛用者

    註冊日期:03-27-2008
    文章:367
    謝謝你: 45
    在 19篇文章中獲得 37個感謝
    Dear 吉米丘大,
    小弟之前將2G iPhone 升上 3.1.2韌體.

    使用黑雨Jb+BootNeuter2.1解鎖
    可是機器感覺不太正常..Youtube不能連,
    備份回去iPhone的備忘錄,不能刪除,新增,一下就跳開.
    數據機版本是 "04.05.4_G"這樣是正確嗎??

    依稀記得,在iPlus時代解鎖1.1.4韌體,您所優化的版本,
    有更改權限部份,到3.1.2後還有這個需要嗎??

    小弟有個不情之請...
    手邊臨時找不到mac可做自製韌體,請問能否提供優化過的2G客製化韌體下載呢??

    客製化韌體可以直接在iTunes回覆嗎??還是需要ih8sn0w來回覆客製化韌體??

    (iPhone只有經過iPlus解鎖過,沒有pwned)

    非常感謝!!


  4. #54

    剛加入我們

    註冊日期:01-19-2008
    文章:19
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    各位先進,

    由於等PC版的升級程式一直無下文,本想上網下載已經製作好的3.1.2的軔體,
    但一些朋友勸我說,不要使用來路不明的軔體,以免後患無窮.

    但是又沒有Mac機器可用,因此,在此可否依標題所述的方法來做,懇請先進們指導,謝謝!!
    在做自製軔體時,是否不需要將iPhone手機連線.

    不好意思,打擾各位.

    我目前是2.2.1版本的.


  5. #55
    米咖 的頭像

    新生報到

    註冊日期:02-07-2008
    文章:11
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    pc版啥時出阿

    沒mac真不方便

    台北捷運軟體要3.1.2



  6. #56

    熱血的愛用者

    註冊日期:09-02-2009
    文章:338
    謝謝你: 1
    在 0篇文章中獲得 0個感謝
    引用 作者: lord 查看文章
    請問各位先進2G刷完3.1.2後速度有明顯的提升嗎?相較於2.2.1來說?
    很想替我的2G也升級~但是對iPhone的F/W已經沒啥信心了說
    我個人升級到3.1.2之後覺得速度有變快啦
    也蠻順的,
    不過也有些人升級完之後沒有WIFI
    可能要看運氣了!


  7. #57

    新生報到

    註冊日期:12-04-2007
    文章:8
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    請問吉米大,
    我的MAC 是ibookG4,
    可以用來破解嗎?
    謝謝!


  8. #58

    新生報到

    註冊日期:11-26-2009
    文章:6
    謝謝你: 0
    在 0篇文章中獲得 0個感謝
    my 2G iPhone is currently not working after:

    1. upgrade from 1.1.4 to 3.1.2.
    2. I blackra1n it first.
    3. iTunes does not recognize the SIM
    4. Restore the firmware again..... nothing.... still not recognized

    I have searched here and entered the UDF mode after I created the .ipsw file to restore the iphone, however.....

    1. successfully entered UDF mode (black iPhone screen)
    2. iTunes says "Updating iTunes device recovery software....."
    This stays on for .....ever~ How long does this step take really??
    3. dont know what else I can do now...... with my brickPhone.....

    Can anyone please help me?

    1. I just need to know how to correctly enter UDF mode (if this is incorrect)
    2. Freely choose the .ipsw file i would like to restore the iphone.
    3. and UNLOCK~!!!! This is driving me insane~!!

    PS. my friend did blackra1n on his 2G US model and no problem at all~ What happened to mine??!



  9. #59
    zzz99 的頭像

    超熱血的愛用者

    註冊日期:10-28-2007
    文章:5,186
    謝謝你: 0
    在 3篇文章中獲得 25個感謝
    Because the baseband have updated in your case, this is why u have to unlock it again.

    I know nothing about blackra1n, since you are using Mac, y don u use Pwnagetool?
    Moreover, ur asking blackra1n under a Pwnagetool thread?


  10. #60

    愛用者

    註冊日期:11-05-2007
    文章:102
    謝謝你: 0
    在 1篇文章中獲得 1個感謝


 

 

發文規則

  • 不可以發表新主題
  • 不可以發表回覆
  • 不可以上傳附件
  • 不可以編輯自己的文章
  •  
回到此頁頂端