一篇文章:
https://discussions.apple.com/thread...art=0&tstart=0
可否請大大代為翻譯.....因為有一點看不懂....以下為原文資料
According to section 2.4, item 1.1 of themanual here
http://www.raidon.com.tw/user_file/000441.pdf
that unit responds to DHCP, so it shouldwork with an IP address range.
I'd disconnect that unit, launch AirPortUtility, select your AirPort Extreme, and put it into "manual setup" mode. Pull down the "Base Station" menu and select "Logs andStatistics". Select the "DHCP Clients" tab. Note everything yousee in that table. Now power on the Raidon" unit and connect it viaEthernet to your AirPort Extreme. If all goes well, within two minutes you'llsee the Raidon unit appear in the "DHCP Client" list. That will showyou its IP address. You should now be able to connect to it via the URL ofhttp://thatIPaddress.
拜託板上大大...謝謝
