主題: iboot為啥這樣?
顯示結果從 1 到 2 共計 2 條
-
06-30-2010 #1
這個iboot版本正常?
Device Descriptor:
bcdUSB: 0x0200
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 (64)
idVendor: 0x05AC (Apple Computer)
idProduct: 0x1227
bcdDevice: 0x0000
iManufacturer: 0x01
0x0004: "Apple Inc."
0x0009: "Apple Inc."
iProduct: 0x02
0x0004: "Apple Mobile Device (DFU Mode)"
0x0009: "Apple Mobile Device (DFU Mode)"
iSerialNumber: 0x03
0x0004: "CPID:8720 CPRV:13 CPFM:03 SCEP:04 BDID:00 ECID:SRTG:[iBoot-240.5.1]"
0x0009: "CPID:8720 CPRV:13 CPFM:03 SCEP:04 BDID:00 ECID:SRTG:[iBoot-240.5.1]"
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x02
Open Pipes: 0
Configuration Descriptor:
wTotalLength: 0x0019
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 (Bus Powered )
MaxPower: 0x32 (100 Ma)
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x00
bInterfaceClass: 0xFE
bInterfaceSubClass: 0x01
bInterfaceProtocol: 0x02
iInterface: 0x00此篇文章於 07-02-2010 15:00 被 lspss93088 編輯。
-
07-01-2010 #2
把ECID改掉吧
這樣大家都能備份你的SHSH了




